Canon MultiPASS F50 Software User's Manual page 144

To remove the device: Click Start, point to Settings and then click
Control Panel. In the Control Panel window, double-click System. On
the Hardware tab, click Device Manager. Under Other Devices, click
the device and press the Delete key.
If you are unable to remove the device, turn the printer off, and then
on again.
3. Disconnect your printer cable from the port.
4. Start the MultiPASS Suite installation process again. For instructions,
see Chapter 2, "Installing the MultiPASS Suite."
❏ For Windows 98/Me with USB port connection: Are you not able to
complete the installation of the MultiPASS Suite?
During the installation, you may be unable to continue beyond the dialog
box prompting you to connect your printer cable to your port. You cannot
continue the installation of the MultiPASS Suite.
In this situation, you need to exit the MultiPASS Suite setup, remove the
device from the Windows Device Manager, and restart the installation
process.
To resolve this situation:
1. Click No in the dialog box prompting you to connect your cable, and
exit the MultiPASS Suite setup.
2. Remove the device from the Windows Device Manager. The device
may appear listed as Canon MultiPASS or Unknown Device.
To remove the device: Click Start, point to Settings and then click
Control Panel. In the Control Panel window, double-click System. On
Device Manager tab, under Other Devices, click the device and press
the Delete key.
If you are unable to remove the device, turn the printer off, and then
on again.
3. Disconnect your printer cable from the port.
138 Frequently Asked Questions Chapter 8