Documents Are Not Printing Correctly - Canon MultiPASS F50 Software User's Manual

❏ Is the scanned image blank?
❏ Check that the image source is placed correctly on the platen or in the
automatic document feeder (F50).
❏ Check to see if you specified the desired feed location (platen or
automatic document feeder) in the MultiPASS Toolbar settings.
❏ Does a white border appear on the left hand side of the image?
Set the document approximately 3 millimeters away from the edge of the
platen glass.

Documents Are Not Printing Correctly.

❏ Is the operation panel blank?
You might have a power problem. Check that the power cord is plugged
securely into the printer, that the printer is on, and that your electrical
source is OK.
❏ Is the printer warm to the touch?
The printer might have overheated and shut down. Turn the printer off
and let it cool down for 15 minutes. Try using it again.
❏ Is the ALARM light on?
❏ Check the LCD display for a message. If a message is displayed, take
the appropriate action to correct the error and clear the message.
Press Resume to continue.
❏ Turn off and unplug the printer. Wait 15 seconds and plug it in again
and turn it on. The ALARM light should go out.
140 Frequently Asked Questions
10
Chapter 8