Changing The Port Connection - Canon MultiPASS F50 Software User's Manual

Changing the Port Connection

If you are using Windows 98/Me or Windows 2000, and have a USB port
available on your computer, you may want to change the port to which
you originally connected, either between the parallel port and USB port;
or from one USB port to another USB port, or USB port with a hub.
To change ports between parallel and USB:
1. Remove the MultiPASS Suite software.
For details, see the "Removing the MultiPASS Suite" section in this
chapter.
2. Disconnect the printer from the port on your computer.
3. Reinstall the MultiPASS Suite software.
For details, see the "Installing the MultiPASS Suite" section in
Chapter 2.
To change ports between USB ports, or a USB port with a hub:
Simply disconnect the printer cable from the USB port on your computer
and, when ready, reconnect to the other USB port or hub.
When changing the port connection, it is not necessary to remove and
reinstall the MultiPASS Suite software.
134 Fine-tuning the MultiPASS Suite
6
Chapter 7