Canon imageCLASS MF4690 Operation Manual page 90

4
Use the numeric keys to enter the desired copy quantity (1 to 99).
5
Press [Start].
When you set the document on the platen glass, press [Start] for each document. When scanning is
complete, press [OK].
– If you press [OK] without scanning the second document, only the first document will be printed on
the left side of the paper.
– A maximum of 1/8" (4 mm) margin will be produced between the two reduced documents in 2 on 1
combination copying.
– To cancel all settings, press [Stop/Reset].
– When you switch the mode by pressing the mode keys such as [SEND/FAX], all settings will be also
canceled. If you want to keep the settings as the default, see "Setting Menu," on p. 12-6.
3-13