Standby Mode - Canon imageCLASS MF4690 Operation Manual

Select the Receive Mode
Select the receive mode with [
[ ], then press [OK].
<FaxOnly>: Answers all calls as faxes.
<FaxTel>: Switches between fax and voice calls
automatically if an external telephone is connected to the
machine.
<AnsMode>: Receives faxes automatically and records
voice messages.
<DRPD>: Distinguishes between fax and voice calls if you
want to use an external telephone.
<Manual>: Does not answer any calls. You have to
manually receive faxes.
For details on these settings, see Chapter 4, "Sending and
Receiving," in the Reference Guide.
– For <AnsMode>, make sure an answering machine
is connected to the machine.
– For <DRPD>, subscription to a DRPD service is
required.
Exit the Setting Menu
] or Press [Stop/Reset] to return to the

standby mode.

You press [Stop/Reset] to cancel a job:
●
The <CANCEL?> message appears. Press
[ ] to select <Yes>. The job is canceled,
and the display returns to the standby
mode.
The <TONER LOW/PREPARE NEW
●
TONER> message appears:
The toner cartridge is almost empty.
Replace the toner cartridge or you can
continue printing by setting <CONT.
PRINTING> to <KEEP PRINTING>. For
details on this error message, see
"Replacing the Toner Cartridge," on
p. 10-10.
5-3