Canon imageCLASS MF4690 Operation Manual page 142

3
Press the one-touch key or [Coded Dial] followed by the three-digit code under
which the desired address group is registered.
If you pressed a wrong key or code, press [Clear], and perform step 3 again.
If you want to adjust the image quality and density, see "Scan Settings, " on p. 4-4.
4
Press [Start].
When you set the documents on the platen glass, press [
size, then press [Start] for each document. When scanning is complete, press [OK] to start sending.
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if
you have specified the destination by any other method than using numeric keys, the machine starts
scanning automatically without pressing [Start], after the preset time for this setting is elapsed.
] or [ ] to select the document
4-45