Canon imageCLASS MF4690 Operation Manual page 296

SYSTEM SETTINGS
5. SNMP WRITABLE 2
4. DEDICATED PORT
5. ETHERNET DRIVER
1. AUTO DETECT
AUTO
MANUAL
1. COMMUNICATN
MODE
2. ETHERNET
TYPE
6. VIEW IP ADDRESS
1. IP ADDRESS
2. SUBNET MASK
3. GATEWAY ADDRESS
Enables computers on the network to access the machine and
modify its settings.
– OFF
– ON
Sets or browses detailed information on the machine with a
Canon printer driver or utility.
– ON
– OFF
Specifies the type of network connection.
Selects the detection method of Ethernet driver.
Sets the machine to determine the communication mode (Half
duplex/Full duplex) and Ethernet type (10Base-T/100Base-TX)
automatically.
Sets the communication mode and Ethernet type manually.
Selects the communication mode.
– HALF DUPLEX
– FULL DUPLEX
Selects the Ethernet type.
– 10 BASE-T
– 100 BASE-TX
Checks the current network settings.
Checks the IP address.
Checks the subnet mask.
Checks the gateway address.
12-39