4
Press [
] or [
5
Press [
] or [
You can set the interval from 3 to 30 minutes (in one-minute increments).
You can also enter values using numeric keys.
The default setting is 5 minutes.
6
Press [Stop/Reset] to return to standby mode.
–
[Energy Saver] lights green when the machine enters the Sleep mode.
–
To resume normal mode from the Sleep mode, press [Energy Saver] on the operation panel.
–
To enter the Sleep mode manually, press [Energy Saver] on the operation panel.
–
The machine will not enter the Sleep mode when:
•
the machine is in operation
•
the Processing/Data indicator lights or flashes
•
a message appears on the display and the Error indicator flashes
•
paper is loaded in the multi-purpose tray
•
a paper jam occurs in the machine
•
the handset of the external telephone is off the hook
–
The machine will leave the Sleep mode when:
•
you press [Energy Saver] on the operation panel
•
a fax is received
•
the handset of the external telephone is off the hook
•
a print job is sent from a computer, and the print is started
1-16
] to select <ON>, then press [OK].
] to select the desired interval, then press [OK].