Canon imageCLASS MF4690 Operation Manual page 270

TX/RX SETTINGS
7. TX TERMINAL ID
1. PRINTING
POSITION
2. TELEPHONE #
MARK
8. COLOR TX GAMMA
9. SHARPNESS
10. LOG USB MEM.STORE Sets whether to leave the log of saving images to the USB
11. INIT STANDARD SET
2. RX SETTINGS
Sets the options for sender information.
Selects where the sender information is printed in small type at
the top of each page.
– OUTSIDE IMAGE
– INSIDE IMAGE
Prefixes your number with the abbreviations FAX or TEL in your
sender information.
– FAX
– TEL
Sets the gamma value for color scanned data. If the set value
corresponds to the gamma value at the recipient's machine, the
scan exposure of the output data at the recipient's machine is
automatically adjusted to the level best suited to the quality of
the original.
(GAMMA 1.8, GAMMA 2.2, GAMMA 1.0, GAMMA 1.4)
Sets the contrast of the images you scan. (1-7)
memory.
– OFF
– ON
Sets whether to restore <STANDARD SETTINGS> in <TX
SETTINGS> to the default.
Press [ ] to select <YES>.
If you do not want to restore all settings, press [
<NO>.
Sets the reception features.
] to select
12-13