Canon imageCLASS MF4690 Operation Manual page 295

SYSTEM SETTINGS
ON
2. USE SMB CLIENT
OFF
ON
1. SERVER
2. WORKGROUP
3. COMMENT
4. LM
ANNOUNCE
3. SNMP SETTINGS
1. USE SNMP
2. COMMUNITY NAME 1 Sets SNMP community name 1 (default: public).
3. COMMUNITY NAME 2 Sets SNMP community name 2.
4. SNMP WRITABLE 1
12-38
Specifies a MAC address filter to access. MAC address must be
entered for each setting.
– 1. PERMIT RX ADD1
– 2. PERMIT RX ADD2
– 3. PERMIT RX ADD3
– 4. PERMIT RX ADD4
– 5. PERMIT RX ADD5
Sets the SMB settings to use the machine on a NetBIOS network.
SMB client is not used.
SMB client is used.
Enters the NetBIOS name of the machine.
Enters the name of the workgroup the machine belongs to.
Enters a comment about the printer.
Sets if the machine notifies the LAN Manager of its existence.
– OFF
– ON
Sets detailed information about SNMP.
Sets whether to activate SNMP.
– ON
– OFF
Enables computers on the network to access the machine and
modify its settings.
– ON
– OFF