Storing/Editing Group Addresses
The destinations must be registered in one-touch keys, or coded dial codes beforehand.
Registering Group Addresses
●
1
Press [Additional Functions].
2
Press [
] or [
3
Press [
] or [
4
Press [
] or [
you want to set as the group address, then press [OK].
You can also select a one-touch key or coded dial code by pressing the corresponding one-touch key, or
[Coded Dial] followed by the desired three-digit code.
] to select <ADDRESS BOOK SET.>, then press [OK].
] to select <GROUP DIAL>, then press [OK].
] to select an empty one-touch key or coded dial code that
4-29