Error Code
#0753
A TCP/IP error occurred while sending
an e-mail message. (Socket, Select
error, etc.)
#0755
–
You cannot send jobs because
TCP/IP is not functioning correctly.
–
The IP address is not set.
–
When the machine was turned ON,
an IP address was not assigned to
the machine by the DHCP, RARP, or
BOOTP server.
#0801
–
A timeout error occurred while the
machine was communicating with
the SMTP server to send an e-mail
message.
–
The SMTP server returned an
error while trying to connect. The
destination is not correct. An error
occurred on the server side during
transmission to a file server.
Description
Action
Check the network cables and
connectors. If the machine still does
not operate normally, turn the main
power OFF, and then back ON.
–
Check <TCP/IP SETTINGS>
in <NETWORK SETTINGS> in
<SYSTEM SETTINGS>.
–
Check <TCP/IP SETTINGS>
in <NETWORK SETTINGS> in
<SYSTEM SETTINGS>.
–
Check <TCP/IP SETTINGS>
in <NETWORK SETTINGS> in
<SYSTEM SETTINGS>. Or wait a
while, and then try sending again.
–
Check that the SMTP server is
functioning normally, or check the
network status.
–
Check that the SMTP server is
functioning normally. Check
the network status. Check the
destination setting. Check the
status and setting of the file server.
11-25