Canon imageCLASS MF4690 Operation Manual page 271

TX/RX SETTINGS
1. TWO-SIDED PRINT
2. RECEIVE REDUCTION
ON
1. RX
REDUCTION
2. REDUCE
DIRECTION
OFF
3. RX PAGE FOOTER
4. CONT. PRINTING
RX TO MEMORY
KEEP PRINTING
12-14
Sets whether the machine prints received documents on both
sides of the paper. (See Chapter 4, "Sending and Receiving," in
the Reference Guide.)
– OFF
– ON
Sets whether the received images print out at a reduced size.
(See Chapter 4, "Sending and Receiving," in the Reference
Guide.)
Image reduction is turned on.
Selects the reducing type.
– AUTO
– FIXED REDUCTION (90%, 95%, 97%, 75%)
Selects the reducing direction.
– VERTICAL ONLY
– HORIZ & VERTICAL
Image reduction is turned off.
Sets whether to insert the machine's fax number and the sender
information on received faxes.
– OFF
– ON
Selects how the machine responds when the <TONER LOW/
PREPARE NEW TONER> message appears.
The machine stores all documents in memory.
The machine does not store documents in memory if the toner
runs out. Reset to <RX TO MEMORY> after replacing the toner
cartridge.