Adjusting Seating Position - Normal Seat - CanyCom Masao CMX2302 Operator's Manual

4
Slide lever
5364M-5351-0401-060
Seat Suspension Adjustment Lever
5347M-0401-130E
5347M-0401-100E
5347M-0401-161E
Operation
Seat
Reclining Knob
Safety Lock
Sliding seat
1. Pull the slide lever to the right to slide the
seat forward or backward.
2. When the seat is in a desired position,
release the slide lever and lock the seat
securely.
Adjusting Stiffness
1. Move the seat suspension adjustment lever
to adjust to a desired seat stiffness.
Adjusting Reclining Angle
1. Rotate the reclining knob on the right of the
seat to adjust the reclining angle of the seat.
NOTE
• Do not adjust the seat to the rearmost
position and recline seat. The seat may
contact with the engine hood. This may
activate the seat safety switch and stop the
engine. Adjust the seat within the range of
not contacting with the engine hood.
Raising Seat
1. Slide the seat to the rear most position.
2. Raise the seat and push the safety lock
inward to hold the seat in position.
NOTE
• Move the seat and see if the seat is held in
place firmly.
-20-