Setting Your Changes As A New Default; Restoring All Settings To The Factory Settings; Sending A Fax Manually; Sending A Fax At The End Of A Conversation (Mfc-660Cn And Mfc-845Cw Only) - Brother MFC-440CN User Manual

Chapter 5
f
When you have finished, press
Stop/Exit.
Setting your changes as a
new default
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Scan Size you use
most often by setting them as default. These
settings will stay until you change them again.
a
Press (Fax).
b
Press a or b to choose your new
setting.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press a
or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press (Fax).
b
Press a or b to choose
Factory Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
42

Sending a fax manually

Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
5
a
Press
b
Load your document.
c
To listen for a dial tone, do one of the
following:
(MFC-440CN) Pick up the handset of
an external phone.
(MFC-660CN) Press
Speaker Phone or pick up the
handset.
(MFC-845CW) Press
Speaker Phone on the machine or
press
handset.
d
Dial the fax number.
e
When you hear the fax tone, press
Mono Start or Colour Start on the
machine.
If you are using the scanner glass, press
1 on the machine to send a fax.
f
If you picked up the handset, replace it.
5
Sending a fax at the end of a
conversation (MFC-660CN
and MFC-845CW only)
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Press
c
Load your document.
(Fax).
on the cordless
(Fax).
5
5