Making Copies; How To Copy; Entering Copy Mode; Making A Single Copy - Brother MFC-440CN User Manual

13

Making copies

How to copy

Entering Copy mode

When you want to make a copy, press
(Copy) to illuminate it in green.
The LCD shows:
COPY
Quality
Enlarge/Reduce
Paper Type
Paper Size
Brightness
Copy Start Press
1 No of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
Quality (See page 89.)
Enlarge/Reduce (See page 89.)
Paper Type (See page 92.)
Paper Size (See page 92.)
Brightness (See page 91.)
Contrast (See page 91.)
Color Adjust (See page 92.)
Stack/Sort (See page 91.)
Page Layout (See page 90.)
Set New Default (See page 93.)
Factory Reset (See page 93.)
88
13
13
1
01
Normal
100%
Plain Pap
A4
0
When the option you want is highlighted,
press OK.
Note
The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer
on page 24.)

Making a single copy

a
Press (Copy).
b
Load your document.
(See Loading documents on page 10.)
c
Press Mono Start or Colour Start.

Making multiple copies

You can make up to 99 copies.
a
Press (Copy).
b
Load your document.
c
Enter the number of copies you want.
d
Press Mono Start or Colour Start.
Note
To sort the copies, press a or b to
choose Stack/Sort. (See Sorting
copies using the ADF on page 91.)

Stop copying

To stop copying, press Stop/Exit.
13
13
13
13