Making N In 1 Copies Or A Poster - Brother MFC-440CN User Manual

Chapter 13
50%
69% A4iA5
78% LGLiLTR
83% LGLiA4
93% A4iLTR
97% LTRiA4
100%*
104% EXEiLTR
142% A5iA4
186% 10×15cmiLTR
198% 10×15cmiA4
200%
Custom(25-400%)
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
Page Layout Options are not available
with Enlarge/Reduce.
Making N in 1 copies or a
poster (page layout)
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature, your machine divides
your document into sections, then enlarges
the sections, so you can assemble them into
a poster. If you want to print a poster, use the
scanner glass.
Important
Please make sure paper size is set to
Letter or A4.
You cannot use the Enlarge/Reduce
setting with the N in 1 and Poster features.
If you are producing multiple colour
copies, N in 1 copy is not available.
90
(P) means Portrait and (L) means
Landscape.
You can only make one poster copy at a
time.
a
Press
b
Load your document.
c
Enter the number of copies you want.
d
Press a or b to choose Page Layout.
Press OK.
e
Press a or b to choose
Off (1 in 1), 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L)or Poster(3 × 3).
Press OK.
f
If you do not want to change additional
settings, press Mono Start or
Colour Start to scan the page.
If you are making a poster or placed the
document in the ADF, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to step g.
g
After the machine scans the page, press
13
1 to scan the next page.
h
Place the next page on the scanner
glass.
Press OK.
Repeat steps g and h for each page of
the layout.
i
After all the pages have been scanned,
press 2 to finish.
Note
If photo paper has been chosen in the
Paper Type setting for N in 1 copies, the
machine will print the images as if plain
paper had been chosen.
(Copy).