Beeper Volume; Speaker Volume - Brother MFC-440CN User Manual

Chapter 3

Beeper Volume

When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Beeper.
Press OK.
e
Press a or b to choose Low, Med,
High or Off
Press OK.
f
Press Stop/Exit.
26

Speaker Volume

3
You can choose a range of speaker volume
levels, from High to Off.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Speaker.
Press OK.
e
Press a or b to choose Low, Med,
High or Off.
Press OK.
f
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Speaker Phone (MFC-660CN and
MFC-845CW only).
a
Press Speaker Phone.
b
Press d or c
This setting will stay until you change it
again.
c
Press Speaker Phone.
Note
You can adjust the speaker volume while
you are listening to your outgoing
message (OGM) and incoming messages
(ICM's) by pressing
(MFC-660CN and MFC-845CW only).
3
.
d or c