Sending A Fax; Entering Fax Mode; Faxing From The Adf - Brother MFC-440CN User Manual

5

Sending a fax

Entering Fax mode

When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in green.
The LCD shows:
FAX
Fax Resolution
Contrast
Speed-Dial
Outgoing Call
Fax Start Press
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
Fax Resolution (See page 39.)
Contrast (See page 39.)
Speed-Dial (See page 59.)
Outgoing Call (See page 60.)
Caller ID hist. (MFC-660CN and
MFC-845CW only) (UK and Ireland only)
(See page 61.)
Broadcasting (See page 38.)
Delayed Fax (See page 41.)
Batch TX (See page 41.)
Real Time TX (See page 40.)
Polled TX (See page 86.)
Polling RX (See page 84.)
36
5
09012345689
Standard
Auto
Overseas Mode (See page 41.)
Scan Size (See page 37.)
Set New Default (See page 42.)
Factory Reset (See page 42.)
When the option you want is highlighted,
press OK.

Faxing from the ADF

a
Press (Fax).
b
Put the document face down in the ADF.
c
Enter the fax number using the dial pad,
Speed-Dial or Search.
d
Press Mono Start or Colour Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If the memory is full, the document will be
sent in real time.
5
5