Brother MFC-440CN User Manual page 143

Error Message
Out of Memory
Paper Jam
Unable to Change XX
Unable to Clean XX
Unable to Init. XX
Unable to Print XX
Unable to Scan XX
Unable to use Phone
XX
Wrong Paper Size
Wrong USB device
Cause
The machine's memory is full.
Paper is jammed in the machine.
The machine has a mechanical
problem.
— —
OR
A foreign objects such as a clip or
ripped paper is in the machine.
Paper is not the correct size.
A non-PictBridge compatible or
broken device has been
connected to the PictBridge port.
Troubleshooting and Routine Maintenance
Action
Fax sending or copy operation in
progress
Do one of the following:
Press Stop/Exit and wait until the other
operations in progress finish and then
try again.
Clear the data in the memory. To gain
extra memory, you can turn off
Advanced Fax Operation. (See Turning
off Advanced Fax Operations on
page 76.)
Print the faxes that are in the memory.
(See Printing a fax from the memory on
page 49.)
Printing operation in progress
Reduce print resolution. (For details, see
®
Printing for Windows
Faxing for Macintosh
User's Guide on the CD
(See Printer jam or paper jam on
page 134.)
Open the scanner cover and remove any
foreign objects inside the machine. If the
error message continues, do one of the
following:
(MFC-440CN only)
See Transferring your faxes or Fax
Journal report on page 132 before
disconnecting the machine so you will
not lose any important messages.
Then, disconnect the machine from the
power for several minutes and then
reconnect it.
(MFC-660CN and MFC-845CW only)
Disconnect the machine from the
power for several minutes, then
reconnect it. (The machine can be
turned off for up to 24 hours without
losing faxes stored in the memory. See
Transferring your faxes or Fax Journal
report on page 132.)
Load the correct size of paper (Letter,
Legal or A4), and then press Mono Start
or Colour Start.
Unplug the device from the PictBridge port,
then press Power Save to turn the
machine off and then on again.
or Printing and
®
in the Software
-
ROM.)
131