Replace The Fuse - ETC High End Systems SolaWash 2000 User Manual

Replace the Fuse

WARNING:
AVERTISSEMENT :
calibre indiqués.
A replaceable AC line fuse is provided in the fixture to prevent overload.
Supplies needed:
• Flatblade screwdriver
• One replacement fuse: 15 A 250 V 6x32 mm VDE slow blow ceramic
1. Disconnect power to the fixture.
2. Using a flatblade screwdriver, push the fuse holder in and twist it to remove it from the
fixture. (See
3. Remove the blown fuse from the holder and replace it with another 15 A 250 V 6x32 mm
VDE slow blow ceramic fuse.
4. Reinstall the fuse holder. Using a flatblade screwdriver, push the holder in and twist it
until it is secure in the fixture.
Maintenance
Replace fuses with the specified type and rating only.
Remplacez les fusibles uniquement par le type et le
Fixture Overview on page 6 for the location of the fuse holder.)
21