General Operation And Use Guidelines - ETC High End Systems SolaWash 2000 User Manual

General Operation and Use Guidelines

• This fixture is only allowed to be operated with the maximum alternating current that is
stated in the technical specifications label provided on the fixture.
• Lighting effects are not designed for permanent operation. Consistent operation breaks
may extend the life of the fixture.
• When choosing the installation location, make sure the fixture will not be exposed to
extreme heat, moisture, or dust.
• Do not point the lens toward the sun or other bright light source. Doing so could damage
the fixture.
• If using the supplied brackets with quick-locking thumb screws to hang the fixture,
ensure that the thumb screws have engaged a complete 90-degree positive latch.
• Operate the fixture only after having familiarized yourself with its functions. Do not
permit persons who are not qualified and familiar with its functions to operate the
fixture.
• Do not modify the fixture. Any modifications will void the warranty.
• This manual describes the proper installation and operation of this fixture. Using this
fixture in any way other than the intended use may cause damage and void the warranty.
• When the fixture has been stored or transported in cold temperatures, allow it to warm
to room temperature for a minimum of one hour before applying power. Applying power
to a cold fixture may cause damage to the fixture and void the manufacturer warranty.
• Please use the original packaging if the fixture is to be transported. ETC will not be
responsible for the fixture if packaging other than manufacturer provided packaging is
used.
Safety Considerations 5