Answering Calls - Tadiran Telecom T27P User Manual

User Guide for the T41P IP Phone
You can press
to retrieve the desired call.
Note
If multiple accounts are registered on the phone, you can first press the desired line key
in the idle screen or press the Line soft key in the dialing screen, and then you can use
the selected account to place a call.

Answering Calls

When you are not in another call, you can answer a call in one of three ways:
Using the handset

Using the speakerphone

Using the headset

Note
You can reject incoming calls by pressing the X key or the Reject soft key. You can also
activate Do Not Disturb mode to ignore the incoming calls without ringing on your phone.
For more information, refer to
You can forward incoming calls to someone else by pressing the FWD soft key. For more
information, refer to
d fi d
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:
1. Pick up the handset.
To answer a call using the hands-free speakerphone mode:
Do one of the following:
- Press
- With the handset on-hook and the headset mode deactivated, press the Answer
soft key.
- With the handset on-hook and the headset mode deactivated, press the line key
(the line key LED flashes green).
To answer a call using the headset:
Do one of the following:
- Press
- With the headset mode activated, press the Answer soft key.
- With the headset mode activated, press the line key (the line key LED flashes
26
or to switch between calls, and then press the Resume soft key
Do Not Disturb (DND)
Error! Reference source not found.
.
.
on page 29.
on page Error! Bookmark not