Answering Calls - Tadiran Telecom T21P E2 User Manual

You can have more than one call on your T21P E2 IP phone. To place a new call during
an active call, do one of the following:
- Press the line key. The active call is placed on hold.
Enter the desired number using the keypad.
Press
- Press the Hold soft key to place the original call on hold.
Press the NewCall soft key.
Enter the desired number using the keypad.
Press
You can press
to retrieve the desired call.
Note
If multiple accounts are registered on the phone, you can first press the desired line key
in the idle screen or press the Line soft key in the dialing screen, and then you can use
the selected account to place a call.

Answering Calls

When you are not in another call, you can answer a call in one of three ways:
Using the handset

Using the speakerphone

Using the headset

Note
You can reject incoming calls by pressing the Reject soft key or the X key. You can also
activate Do Not Disturb mode to ignore all incoming calls without ring on your phone. For
more information, refer to
You can forward incoming calls to someone else by pressing the FWD soft key. For more
information, refer to
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:
1. Pick up the handset.
, , or the Send soft key.
, , or the Send soft key.
or to switch between calls, and then press the Resume soft key
Do Not Disturb (DND)
Call Forward on page
on page 24.
Error! Bookmark not defined..
Basic Call Features
21