Dss Keys - Tadiran Telecom T27P User Manual

User Guide for the T41P IP Phone
The HEADSET key LED illuminates solid green when the headset mode is activated.
Press the line key or the Answer soft key to answer an incoming call. The call will be
connected to your headset automatically.
Enter the desired number and then press the Send soft key, the phone will then
place a call using the headset automatically. For more information on using the
headset to place a call, refer to
To deactivate the headset mode:
1. Press
The HEADSET key LED goes out when the headset mode is deactivated.

DSS Keys

There are three types of DSS keys: Line Keys, Programmable Keys and Ext Keys. Details
will be introduced in the following. The T27P/G IP phone supports 21 line keys.
Line Keys
You can assign predefined functionalities to line keys. You can also define a label for a
line key feature which will appear on the LCD screen. Line keys allow you to quickly
access features such as recall and voice mail. The line key LEDs will indicate the
monitored status when the line keys are assigned with particular features, such as BLF .
The default key type of line key 1-6 is Line. The default key type of line key 7-21 is N/A,
which indicates that this line key provides no functionality until configuration.
To assign functionality to a line key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired line key, and then press the Enter soft key.
3. Select the desired key type from the Type field.
4. (Optional.) Select the desired key event type from the Key Type field.
5. (Optional.) Select the desired line from the Account ID field.
6. (Optional.) Enter a string that will appear on the LCD screen in the Label field.
7. (Optional.) Enter the corresponding value in the Value field.
8. (Optional.) Enter the corresponding value in the Extension field.
9. Press the Save soft key to accept the change or the Back soft key to cancel.
Line key is configurable via web user interface at the path DSSKey->Line Key.
Note
When the phone is idle, you can also long press the line key to configure it directly on the
phone.
You can assign functionalities to 21 line keys. These 21 line keys are indicated on three
20
Placing Calls
again on the phone.
on page 24.