Microtek S6570 User Manual page 3

Safety Instructions
Please read the following instructions
carefully before using your scanner; these
instructions describe the correct ways to
use the scanner and its accessories to avoid
damage to you or the machine due to
improper use.
Power Specifications and Power
Please only use the power
・
specifications labeled on the scanner.
・ Please insert the power plug in the
power outlet properly to avoid
causing a fire due to poor contact.
・ Please place the power cable where it
cannot be easily stepped on, and do
not place any objects on top of it.
Make sure to unplug the power plug
・
from the power outlet if this scanner
is not used for extended periods of
time.
Moving and Storing the Scanner
・ Do not place the scanner on sliding,
inclined or uneven positions.
Do not use the scanner at locations
・
close to water sources. Do not place
any liquid products on top of the
scanner to avoid the danger of electric
shocks.
・ Do not place the scanner close to
heaters or locations close to high
temperatures
Services
When the scanner needs services,
・
please switch off the scanner power
and unplug the power cable of the
scanner, then consult a qualified
maintenance service center.
・ Please only use scanner components
manufactured by the original
manufacturer or designated
manufacturers.
Using the Scanner
・ Before using the scanner, ensure the glass
panel is clean and free of dust or any
obstructions.
Energy-saving mode: The scanner
・
enters sleep mode if not used for 15
minutes or longer.
・ Do not place the scanner close to
heaters or locations close to high
temperatures.
・ As the scanner nears the end of its
lifespan, increase regular checks for
safety and reliability.
For proper disposal, follow local
・
environmental regulations.
Maintenance
・ Before cleaning the scanner, power off
and unplug the power cord.
・ For repairs, unplug and seek
professional service.
Use manufacturer-specified or
・
equivalent parts for replacements.
・ Ensure safety by inspecting before each
use and annually.
III