Disposal - Microtek S6570 User Manual

Note
・ Do not install the high-speed scanner on
unsteady or inclined surfaces, or in areas
with severe vibrations, as doing so will
cause the high-speed scanner to drop and
cause personal injuries or damage the
high-speed scanner.
・ Do not block the ventilation openings.
Otherwise, the high-speed scanner may
overheat and there will be the danger of
fire.
・ Do not place small metal objects such as
staples, paper clips or jewelry on the high-
speed scanner. These objects may fall into
the high-speed scanner and cause fire or
electric shock. Whenever such items fall
into the high-speed scanner, you should
switch off its power switch immediately
and unplug its power plug from the power
outlet. Then, contact your local authorized
dealer or customer service center to
maintain the device.
・ Do not place the high-speed scanner in
humid or dusty locations. Doing so will
cause fire or electric shock.
・ Do not place objects on top of the high-
speed scanner. Such objects may overturn
or drop, causing personal injuries.
・ Hold onto the power plug firmly when
unplugging the power cable. Do not tug on
the power cable directly as doing so may
damage or expose the wires inside the
power cable, causing fire or electric shock.
・ Sufficient space should be kept around the
power plug so that it can be easily
unplugged. If objects are stacked around
the power plug, it cannot be unplugged in
emergencies.
・ Do not spray water or flammable
substances (alcohol, paint thinners and
benzene, etc.) into the high-speed
scanner, as doing so may cause fire or
electric shock.
・ When the high-speed scanner is not used
for long periods of time (such as
overnight), its power switch should be
switched off to ensure safety. Also, when
the device is not used for a duration such
as consecutive holidays, its power switch
should be switched off and its power plug
should be unplugged from the power
outlet to ensure safety.
・ Do not wear loose clothing or wear
jewelry when using the high-speed
scanner (they might get pulled into the
high-speed scanner). This will result in
personal injury. In particular, pay extra
attention to necklaces and long hair. If
any object is pulled into the high-speed
scanner, disconnect the power cable
immediately to stop the high-speed
scanner from operating.
・ Please operate carefully when loading
paper and clearing paper jams from the
high-speed scanner. The edges of paper
may cut your hand.
・ Parts with labels may heat up, which may
cause scalding if not operated carefully.
To ensure safe operation, make sure to
follow all safety precautions.

Disposal

・ When disposing the high-speed scanner,
make sure to follow related local laws
and regulations, or consult the dealer
who sold you the high-speed scanner.
1-3