Important Safety Instructions; Installation Location; Power - Microtek S6570 User Manual

Important Safety Instructions

To ensure the safe operation of this high-speed
scanner, make sure to read the following safety
warnings and precautions.

Power

・ Only connect to power adapters with
rated voltage and current (24V, 2.5A).
・ Do not use coiled power cables.
・ Do not use the high-speed scanner
without the specified rated voltage power.
Doing so will cause fire or electric shock.
・ Do not connect other electrical devices to
the same power outlet where the high-
speed scanner is connected. In addition,
when connecting with extension cords,
make sure the rated current of the
extension cord satisfies the current
requirements of the high-speed scanner.
・ If the power cable is frequently stepped
on or has heavy objects placed on top of
it, it will get damaged. Continue using
damaged cables will result in accidents
such as fire or electric shock.
・ Do not tug on the power cable directly.
When disconnecting the power cable,
hold on to the plug and remove it from
the power outlet.
・ Keep other objects clear of the area
around the power plug so that the power
cable can be easily unplugged in
emergencies.
・ If there is anything that you are unclear
about concerning the power, please
contact your local authorized dealer or the
customer service center to learn more
information.

Installation Location

・ Keep sufficient space around the high-
speed scanner for operation, maintenance
and ventilation use.
・ The performance of this high-speed
scanner will be affected by its installation
environment. Make sure the installation
location of the high-speed scanner
complies with the following
environmental requirements:
・ Keep sufficient space around the high-
speed scanner for operation, maintenance
and ventilation use.
・ Avoid installing the device under direct
sunlight exposure. If this is unavoidable,
the high-speed scanner should be covered
with curtains.
・ Avoid installing at locations where large
amounts of dust accumulate.
・ Avoid warm or humid locations, such as
close to water faucets, heaters or
humidifiers; also avoid locations that emit
strong fumes such as ammonia, paint
thinners or other volatile chemicals.
・ Avoid installing in locations with
vibrations.
・ Avoid exposing the high-speed scanner to
locations with rapid temperature changes.
If the room where the high-speed scanner
is installed is colder, but the temperature
rises rapidly, water drops (condensation)
may form inside the high-speed scanner.
This will cause the scanning quality to
drop significantly.
・ The following conditions are
recommended for getting the best
scanning qualities:
・ Room temperature: 0°C to 40°C
・ Humidity: 20% to 80% (relative humidity)
・ Avoid installing the high-speed scanner
next to devices that generate magnetic
fields (such as speakers, television or
radios).
1-1