Cv10 Panels - Connector Layout - AMX Modero NXD-CV10 Operation/Reference Manual

Introduction
Specifications for 10" Widescreen Video Touch Panels (Cont.)
Other AMX Equipment
(Cont.):
It is recommended that firmware KIT files only be transferred over a direct USB or
Ethernet connection and only when the panel is connected to a power supply. If
battery power or wireless connection fails during a firmware upgrade, the panel flash
file system may become corrupted.

CV10 Panels - Connector Layout

FIG. 3 shows the layout of the connectors (located on the rear of the base on the NXT and on the left side
panel of the NXD panels).
Stereo Output
Mini-USB
(Program)
FIG. 3 Connector layout on the CV10 touch panels
6
• NXT-BP (FG2255-10)
- Battery pack for Table Top panels.
• NXT-CHG Kit (FG2250-50K)
- Battery charger and 2 NXT-BP batteries
• Upgrade Compact Flash (factory programmed with firmware):
NXA-CV10CF128M - 128 MB Compact Flash card (FG2116-65)
NXA-CV10CF256M - 256 MB Compact Flash card (FG2116-66)
NXA-CV10CF512M - 512 MB Compact Flash card (FG2116-67)
NXA-CV10CF1G - 1 GB Compact Flash card (FG2116-68)
Ethernet (CAT5)
Keyboard/Mouse
A L
ETHERNET
PROGRAM
10/100
NXT-CV10 - connectors located
on rear panel of the base
Audio-Video from
(USB)
NXA-AVB/ETHERNET (CAT5)
12VDC
KEYBOARD / PWR
AUDIO / VIDEO
MOUSE
NXD-CV10 - connectors located
on left side panel
10" Modero Widescreen Touch Panels
Power