AMX Modero NXD-CV10 Operation/Reference Manual page 89

G4 panels
FIG. 76 Manage WebControl Connections page (populated with compatible panels)
FIG. 77 Web Control VNC installation and Password entry screens
The G4 Web Control application is sent by the panel to the computer that is used for
communication. Once the application is installed, this popup will no longer appear.
This popup will only appear if you are connecting to the target panel using a different
computer.
8. In some cases, you might get a Connection Details dialog (FIG. 78)requesting a VNC Server IP
Address. This is the IP Address not the IP of the Master but of the target touch panel. Depending on
which method of communication you are using, it can be found in either the:
9. If a WebControl password was setup on the G4 WebControl page, a G4 Authentication Session
password dialog box appears on the screen within the secondary browser window.
10. Enter the Web Control session password into the Session Password field (FIG. 77). This password
was previously entered into the Web Control Password field within the G4 Web Control page on the
panel.
10" Modero Widescreen Touch Panels
Wired Ethernet - System Settings > IP Settings section within the IP Address field.
Wireless - Wireless Settings > IP Settings section within the IP Address field.
If you do not get this field continue to step 9.
Configuring Communication
Compatible
devices field
(showing G4
WebControl links)
Compression
Options
79