AMX Modero NXD-CV10 Operation/Reference Manual page 33

Outer Housing
FIG. 20
Removal of the outer housing and wireless card location
Front of panel
Compact Flash
Memory Card (Slot 1)
Card Removal Grooves
FIG. 21 Location and orientation of the card slots (both CV10 panels)
4. Remove the new CF memory card from it's anti-static bag.
5. Firmly grip the sides of the new CF memory card and insert it firmly into slot opening (with the
arrow facing towards the pins) until the contact pins are completely inside the flash card and it is
then securely attached to the pin sockets.
6. To complete the upgrade process, either upgrade the remaining wireless card (Step 3) or close and
re-secure the enclosure using the procedures in Step 4: Close and Resecure the NXT Panel
Enclosure section on page 25.
10" Modero Widescreen Touch Panels
CV10 Touch Panel Accessories
Tilt Bracket cover plate
(must be removed first)
Outer housing
installation holes
(located on front panel)
Base
Tilt Bracket cover plate
Wireless CF Card
(Slot 2)
Card removal grooves
23