AMX Modero NXD-CV10 Operation/Reference Manual page 12

Introduction
Key features common to both panels include:
NXT-CV10 (showing FG2259-03 without buttons)
FIG. 2 NXT-CV10 and NXD-CV10 (front views)
The Button Trim Ring is factory installed only on the FG2259-02 and FG2259-03
panel models.
2
CV10 panels are based on the latest display technology and support AMX's 4th generation
(G4) graphics which provide higher brightness, richer colors, and deeper contrast. The new
G4 graphics technology is supported by the latest AMX TPDesign4 Touch Panel Design
program.
CV10 panels display eye-catching images and full-motion video on a large 16:9 image format,
while providing a wide 95-degree top-to-bottom viewing angle.
CV10 panels feature a front panel light sensor, motion sensor, IR receiver and a Sleep/Setup
Access combo button.
CV10 panels are field upgradeable to 802.11g communication via the installation of the new
NXA-WC8011GCF Wi-Fi Card Kit (FG2255-07).
CV10 panels support AMX Computer Control, which enables remote viewing and control of
any networked computer directly from the panel. This gives the user the ability to launch
digital music from a PC, cruise the Internet, check and respond to E-mail, open software files,
and launch applications. Anything you can do on your PC can be accomplished through these
panels.
The optional wireless solution includes an NXA-WC80211GCF internal Wi-Fi card that
allows the CV10 to communicate with a NetLinx Master via a standard 802.11g Wireless
Access Point, and an NXA-BASE/1 battery base kit that allows the NXT to function off the
charge from the included single NXT-BP battery.
CV10 panels feature programmable firmware that can be upgraded via either the Ethernet
port, wireless interface card, or the mini-USB port.
Sleep/Setup Access Button
NXD-CV10 (shown with Button Trim Ring installed)
Programmable
Buttons/LEDs
(1-3)
Sleep/Setup Access Button
10" Modero Widescreen Touch Panels
Programmable
Buttons/LED
(4-6)