Setting Up Your Range - Dacor Epicure ER30D Use And Care Manual

Cooktop Assembly
To avoid the chance of fire, explosion or carbon monoxide
poisoning, do not attempt to use your range without the burners
completely and properly assembled. The burner rings spread
the flame evenly around the burner cap. The burner rings must
be properly seated for proper burner lighting and operation.
Crown Burner
Burner Locations
Stack Burner Assembly
1. Put the burner rings on the burner bases as shown below.
Match the correct sizes. The bottom of the correct size burner
ring fits inside the top of the matching burner base.
2. Turn the ring until it drops into place. Twist each ring back and
forth slightly to make sure it is properly seated.
3. Put the burner caps on top of the burner rings. The ridge
around the bottom edge of the cap goes around the top of the
burner ring.

Step

Step
Stack Burner Assembly

Setting Up Your Range

WARNING
Stack Burners
Ridge on bottom of
Burner Cap

Step
Burner Ring
Burner Base
Crown Burner Assembly
1. Put the burner head in place as shown below. The locating tab
on the burner head goes in the keyed hole as shown.
2. Put the burner ring on the burner head as shown below. Match
the tabs on the bottom of the ring to the slots on the burner
head. Twist each ring back and forth slightly to make sure it is
properly seated.
3. Put the burner cap on top of the burner ring. The ridge around
the bottom edge of the cap goes around the top of the burner
ring.

Step
Ridge on bottom
of Burner Cap

Step
Tabs
Slots

Step
Put locating tab
into keyed hole
Keyed Hole
Crown Burner Assembly
7
Burner Ring
Burner Head
Burner Base