Basic Operations - Aiwa Z-R325 Operating Instructions Manual

BASIC OPERATIONS
&OPEN/
CLOSE
DISC
CHANGE
DISC
DIRECT
PLAY
CD
b
II
9
4,W
LOADING DISCS
DISC
DIRECT
PLAY
RANDOMI
REPEAT
EDITI
CHECK
0-9,+1 o
SHIFT
Press the CD button, then press the A OPEN/
CLOSE button to open the disc compartment. Load
disc(s) with the label side up.
To load one or two discs,
place the discs(s) on tray(s) in the
direction of the arrows as illustrated.
/n \
To load three to five discs,
press the DISC CHANGE button to
rotate the trays after placing two discs. Place the next disc on
the empty tray. Each time the DISC CHANGE button is pressed,
the trays rotate and one disc can be placed.
After placing the disc,
press the 4 OPEN/CLOSE button to
close the disc compartment.
The display shows the information of the disc to be played.
Tray number of the
disc to be played
Total playing time
Total number of tracks
PLAYING DISCS
Load discs.
To play all discs in the disc compartment, press the
- button.
All discs are played once.
Elapsed playing time
I
Number of track being played
To play one disc only, press one of the DISC DIRECT
PLAY buttons.
The disc with the selected tray number is played once.
Only
the selected disc tray number is surrounded.
To select with remote control
Press the DISC DIRECT PLAY 1,2 or 3 button to select disc tray
1,2 or 3. To select disc tray 4 or 5, press DISC DIRECT PLAY 4
or 5 button while pressing the SHIFT button.
To stop play,
press the W button.
To pause play,
press the 11 button. To resume play, press again.
To search for a particular point during playback,
keep the
+ or ~ button pressed and release the button at the desired
point.
To skip to the beginning of a track during playback,
press
the - or - button repeatedly.
To remove discs,
press the A OPEN/CLOSE button.
You can only remove the two discs that face you. When the disc
to be removed does not face you, press the DISC CHANGE
button repeatedly.
Selectinct a track with the remote control
1
2
Press &e of the DISC DIRECT PLAY buttons to select a
disc.
To select disc 4 or 5, press DISC DIRECT PLAY 4 or 5 button
while pressing the SHIFT button.
Press the numeric buttons and the +1 O button to select a
track.
Example:
To select the 25th track, press the +1 O, +1 O and 5 buttons.
To select the 10th track, press the +1 O and O buttons.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1
2
3
Press t~e'DISC CHANGE button.
Two discs can be replaced.
Remove the discs and replace with other discs.
To replace the other two discs, press the DISC CHANGE
button again.
Press the A OPEN/CLOSE button to close the disc
compartment.
7
ENGLISH