Table of Contents
Advertisement
80
Problems with the network
Network status indicator does not light.
Do the following:
•
Check the cabling and network equipment to make sure that all
cables are properly connected.
•
Reinstall the network drivers.
•
Try another port or hub on the switch.
Diagnostics pass but the connection fails.
•
Make sure the network cable is securely attached.
•
Make sure you specify the correct frame type in the NET.CFG file.
The controller stopped working when an add-in adapter was installed.
•
Make sure the cable is connected to the port from the onboard
network controller.
•
Make sure the BIOS is current.
•
Make sure the other adapter supports shared interrupts and your
OS supports shared interrupts.
•
Try reseating the add-in adapter.
The add-in adapter stopped working without apparent cause.
•
Try reseating the adapter first; then try a different slot if necessary.
•
The network files driver may be corrupt or deleted. Delete and
reinstall the drivers.
•
Run the diagnostics.
5 Troubleshooting
Advertisement
Table of Contents
Troubleshooting
