Acer Altos G320 Series User Manual page 117

5 Set the RAID level for the logical drive by highlighting RAID, then
press Enter.
A list of the available RAID levels for the current logical drive
appears.
6 Select a RAID level, then press Enter.
7 Set the RAID logical drive size and stripe size.
8 When you have defined the current logical drive, select Accept,
then press Enter.
9 Repeat step 5 to step 8 to configure additional logical drives.
10 Save the configuration when prompted.
11 Press Esc to return to the Management Menu.
12 Initialize the logical drives. Refer to "Initializing logical drives" on
page 109 for detailed instructions.
New configuration and view/add configuration
New Configuration and View/Add Configuration associate logical
drives with partial and/or multiple physical arrays. New Configuration
deletes the existing configuration and replaces it with the
configuration that you specify. View/Add Configuration lets you
display or modify an existing configuration.
Caution: The New Configuration option erases the existing
configuration data when you save the new array configuration. If
you do not want to delete the existing configuration data, use
View/Add Configuration.
To configure a disk array using New Configuration or View/Add
Configuration:
1 In the Management menu, select Configure, New
Configuration or View/Add Configuration, then press Enter.
An array selection of the devices connected to the current
controller appears.
2 Use the arrow keys to select the specific drives to include in the
array, then press the spacebar to associate the selected drive with
the current array.
107