Table of Contents
Advertisement
32
To install a hard disk
1
Observe the ESD precautions and pre-installation procedures
described on page 25.
2
Push the lever in the direction of the unlock icon
3
Insert the drive into an empty HDD bay (2).
4
Make sure that the drive is properly inserted before closing the
lever, then push the lever in the direction of the lock icon
5
Connect the data (4) and power (5) cables to the new drive.
6
Observe the post-installation instructions described on page 26.
3 System upgrade
(1),
(3).
Advertisement
Table of Contents
Troubleshooting
