Table of Contents
Advertisement
To set an Administrator/User password
1.
Use the up/down keys to highlight a password parameter (Administrator Password or User Password)
then press Enter.
A password box will appear.
2.
Type a password then press Enter.
The password may consist of up to six alphanumeric characters (A-Z, a-z, 0-9).
3.
Retype the password to verify the first entry then press Enter again.
After setting the password, the system automatically sets the chosen password parameter to installed.
To remove the User Password
1.
Use the up/down keys to highlight the Clear User Password parameter then press Enter.
2.
Enter the current Admin password then press Enter.
3.
Press Enter twice without entering anything in the new and confirm password fields.
After doing this, the system automatically sets the User Password parameter to Not installed.
Chapter 2
49
Advertisement
Table of Contents
