Parts Replacement Procedure - SMC Networks XLA-2 Series Operation Manual

8. Parts Replacement Procedure

8-1. Precautions
Be sure to adhere to the instructions given in "2. Precautions 2", when disassembling the product
for maintenance. Along with the precautions listed in Chapter 2, the user should comply with those
listed below.
Warning
• If it is expected that product materials may get stuck to the product, ensure safety is confirmed
before handling. It is recommended that the user wear gloves and a mask.
• Pay attention to the handling of components in accordance with the procedures outlined,
hereafter. Do not apply excessive force or impact. This may damage the product, as well as,
decrease its performance and life expectancy.
• The cylinder portion of this product cannot be disassembled. When the cylinder portion or the
bonnet assembly is damaged or is expected to have been damaged, replace the whole
product or the bonnet assembly.
• Do not disassemble the parts that are not explained in this operation manual. This may
decrease the performance and life expectancy of these parts. In addition, disassembly may
cause danger.
• Torque values specified in this manual must be followed.
specifications, can result in damage to the product.
- 15 -
Not adhering to these
XL-OMS0001-D