Advertisement
Double-sided adhesive tape can only be used for temporary installation. The device
attached by the tape may come unstuck from the surface at any time. As long as
the device is taped, the tamper will not be triggered when the device is detached
from the surface.
SmartBracket has markings on the inner side for easy installation. The
intersection of two lines marks the center of the device (not the mounting
panel). Also, the UP key on SmartBracket marks the top of the keypad.
Orient these markings when installing the keypad.
10. Place the keypad on SmartBracket.
11. Turn on the lines power supply in the
Hub → Settings
12. The device LED indicator will ash. It is a signal indicating that the enclosure
of the keypad is closed.
Ajax PRO app
→ Lines → Lines Power Supply.
:
Advertisement
Need help?
Do you have a question about the KeyPad TouchScreen Fibra and is the answer not in the manual?
Questions and answers