AJAX KeyPad TouchScreen Fibra User Manual page 32

By default, the keypad response is enabled for alarms of all devices in the system.
To set the keypad response to a device alarm:
1. Open the Ajax app
2. Go to the Devices
3. Select the device for which you want to con gure the keypad response from
the list.
4. Go to the device Settings by clicking on the
5. Find the Alert with a siren option and select the toggles which will activate
it. Enable or disable the function.
6. Repeat steps 3–5 for the rest of the system devices.
Setting the keypad response to tamper alarm
KeyPad TouchScreen can respond to enclosure alarms from each system device
with a built-in buzzer. When the function is activated, the keypad built-in buzzer
will emit a sound signal upon triggering the
To set the keypad response to a tamper alarm:
1. Open the Ajax app.
2. Go to the Devices
3. Select the hub and go to its Settings
4. Select the Service menu.
5. Go to the section Sounds and Alerts.
6. Enable the If lid of hub or any detector is open toggle.
7. Click Back to save the new settings.
.
tab.
tab.
icon.
tamper button of the device.
.