Multi Room Setup; System Setup Menu - Pioneer VSX-45TX Elite Operating Instructions Manual

Using Other Functions

MULTI ROOM setup

2
SYSTEM SETUP
3-7
3
System Setup
[1. Surround Setup
[2. THX CINEMA Setup
[3. Input Assign
[4. Function Rename
[5. PHONO/LINE Setup
[6. Multi Room
[7. 12V Trigger
[Exit
4
6. Multi Room
Volume Level
IR Receiver
[Exit]
CAUTION: If the "FIXED"
position is chosen,the
volume will be loud.
5
6. Multi Room
Volume Level
IR Receiver
[Exit]
CAUTION: If the "FIXED"
position is chosen,the
volume will be loud.
6
6. Multi Room
Volume Level
[Exit
CAUTION: If the "FIXED"
position is chosen,the
volume will be loud.
memo
There may be some IR receivers that can't
be used with this receiver. Check with a
PIONEER representative to be sure.
If you selected MR&S in the SURRBACK
SYSTEM setting on page 37 you won't be
able to set the VOLUME LEVEL.
76
MULTI
VCR2 VIDEO CD
OPERATION
1
CD-R/ MD/
TUNER RECEIVER
TAPE1 TAPE2
DIMMER LOUDNESS TONE EFFECT/CH SEL
1 2 3 4
+
SIGNAL SEL DNR BASS/TREBLE
5 6 7 8
–
+
VIDEO SEL HI-BIT 10
DISC
9 0
ENTER
DIRECT ACCESS SEARCH MODE
GUIDE
MENU TOP MENU
TUNER EDIT TRACK
ENTER
EXIT
AUDIO RETURN
MPX
DTV ON/OFF DISP MODE
¶ 8
SUB TITLE
– +
TUNING BAND TUNING
1 3 ¡
– +
STATION DTV MENU CLASS STATION
4 7 ¢
– +
CHANNE CHANNE
]
]
]
]
]
]
]
]
[VARIABLE ]
[PIONEER ]
[VARIABLE ]
[OTHERS ]
[VARIABLE ]
IR Receiver
[OTHERS ]
]
1 Turn on the receiver, your TV and press
RECEIVER on the remote control.
Make sure your TV is set to the receiver.
2 Press the SYSTEM SETUP button.
The SYSTEM SETUP menu appears on the OSD.
3 Use the 5∞ buttons to select MULTI
ROOM. Press ENTER.
4 VOLUME LEVEL should be selected (if
it isn't use the 5∞ buttons to select it).
Press ENTER.
Use the 5∞ buttons to select the VOLUME LEVEL,
VARIABLE or FIXED. Press ENTER.
If you hook up a just a power amplifier in the sub room the
VSX-45TX will act as a pre-amp. In this case choose
VARIABLE. If you hook up a full integrated amplifier in the
sub room (such as another Pioneer VSX receiver) choose
FIXED.
CAUTION!
If the MULTI ROOM is set to FIXED the volume on the main unit
will be set to maximum. Thus, when output, it will be extremely
loud. Please set the master volume controls of the integrated
amplifier in the sub room very low at first and experiment to find
the correct volume.
5 IR RECEIVER should be selected (if it
isn't use the 5∞ buttons to select it).
Press ENTER.
Use the 5∞ buttons to select the IR RECEIVER type,
PIONEER or OTHERS. Press ENTER.
If you have an IR receiver from a different company than
PIONEER, select OTHERS. If you have the Pioneer-made
MR-100, or the IR receiver you're using doesn't seem to
work after selecting OTHERS, select PIONEER.
6 Use the 5∞ buttons to select EXIT,
then press ENTER to go back to the

SYSTEM SETUP menu.

7 Use the ∞5 buttons to select EXIT and
press ENTER.
You will exit the SYSTEM SETUP menu and return to
normal operation.