Mecmesin VortexPro Operating Manual page 4

1 VortexPro and VortexPro Touch motorised torque tester operating manual
2 Introduction
2.1 User manual icons
2.1.1 Warning
2.1.2 Caution
2.1.3 Information
3 Customer responsibilities
4 System summary
4.1 Comms panel/ports
4.2 System identification plate
5 Unpacking and parts supplied
5.1 Inspection and unpacking
5.2 Packaging
5.3 Moving the test stand
5.4 Parts supplied
5.5 Accessories
6 Initial setup
6.1 Locating the stand
6.1.1 Ventilation
6.1.2 Enviroment
6.2 Mains power supply
6.3 Earthing
6.4 Fuse specification
6.5 Attaching the Enhanced Torque Sensor (ETS)
6.6 Fitting the Touch console (optional)
6.7 Connect the test stand to a PC or Touch console
6.8 Cable management
6.9 Attaching grips and fixtures
6.9.1 Upper fixture
6.9.2 Lower fixture
6.10 Test stand states
7 Front panel controls
7.1 Emergency Stop button
7.2 Multi-function scroll wheel control
7.2.1 Scroll wheel colours
7.2.2 Jog mode
7.2.3 Navigation and selection
7.2.4 Central button
7.3 Display panel
7.4 On-screen icons
7.4.1 Pre-Test
7.4.2 During a test
7.4.3 Pause/Stopped
7.4.4 Jog mode
7.4.5 Settings menu
8 Settings
8.1 Jog settings
8.2 Units
8.3 Edit test
8.3.1 Cycle (by Angular Displacement)
4