Disassembly And Repair; Tasks - formlabs Fuse Blast Manual

8

Disassembly and repair

All steps that involve opening the machine and/or investigating internal components
should be done by skilled persons under the guidance of Formlabs Support or a
WARNING
certified service provider. Any damage resulting from attempting disassembly and/
or repair without prior authorization from Formlabs Support or a certified service
provider is not covered by warranty.
8.1

Tasks

Contact Formlabs Support or a certified service provider to receive repair instructions and
authorization, including how to disassemble or remove the exterior paneling.
Task
Replacing the HEPA filter
Replacing the media filter mesh
Replacing the blasting chamber door window
Replacing the blast gloves
Replacing the blast gun nozzle
Any other maintenance or repair tasks not listed in section 6 Maintenance requires servicing
the machine. Contact Formlabs Support or a certified service provider to request in-field
service or an RMA (short for "return to manufacturer authorization").
44
Frequency
When advised by Formlabs Support or a certified
service provider
When advised by Formlabs Support or a certified
service provider
When advised by Formlabs Support or a certified
service provider
When advised by Formlabs Support or a certified
service provider
When advised by Formlabs Support or a certified
service provider