Safety - formlabs Fuse Blast Manual

3

Safety

Read and understand this manual and its safety instructions before using the Fuse
Blast. Failure to do so can result in serious injury or death.
WARNING
Supervise young or inexperienced users to ensure enjoyable and safe operation.
The instructions contain warnings and safety information, as explained below:
DANGER indicates a hazard with a high level of risk which, if not avoided, will result in death or
serious injury.
DANGER
WARNING indicates a hazard with a medium level of risk which, if not avoided, could result in death or
serious injury.
WARNING
CAUTION indicates a hazard with a low level of risk which, if not avoided, could result in minor or
moderate injury.
CAUTION
NOTICE indicates information considered important, but not hazard-related.
NOTICE
DANGER: Dry powders can build static electricity charges, creating an explosive risk.
ENVIRONMENTAL HAZARD: Unsintered SLS powder is classified as a microplastic, a group of plastics
that are hazardous to aquatic life.
CAUTION: Moving parts present crushing and tangling hazards. Take caution when opening and
closing the blasting chamber door.
CAUTION: Moving parts present crushing and tangling hazards. Do not reach into the blasting chamber
while the automatic blasting cycle is running.
MANDATORY ACTION: Refer to instruction manual/booklet.
MANDATORY ACTION: Disconnect before carrying out maintenance or repair.
MANDATORY ACTION: Grounding required.
Safety | 15