formlabs FORM 1 Repacking Manual

Download this manual

REPACKING THE FORM 1

please allow 30 mins for safe repacking

Steps:

1. Clean and store the build platform

2. Remove and store the resin tank

3. Wrap and secure the cover

4. Repack the Form 1

= critical step, please follow carefully!

You Will Need:

1. All Original Packaging

2. Packing Tape

3. Authorized Return Labels

4. Disposable Gloves

5. Paper Towel

6. Plastic Wrap

7. Squeeze Bottle with Isopropyl Alcohol (IPA)

8. Aluminium Foil

Need help?

Do you have a question about the FORM 1 and is the answer not in the manual?

Page 1 Steps: 1. Clean and store the build platform 2. Remove and store the resin tank 3. Wrap and secure the cover 4. Repack the Form 1 = critical step, please follow carefully! You Will Need: 1. All Original Packaging 2. Packing Tape 3.
Page 2 1. Clean and Store the Build Platform wear disposable gloves remove the build platform scrape resin into tank wipe with towel and IPA store build platform in cool, dark place DO NOT RETURN THE BUILD PLATFORM! your replacement will not include another...
Page 3 2. Remove and Store the Resin Tank cover resin with foil and store in a dark wear disposable gloves place until ready to reuse or be disposed 3. Wrap and Secure the Cover you may need to ask a friend to help wrap around the entire machine twice vertically using edge protectors, wrap several cover should feel sturdy against...
Page 4 4. Repack the Form 1 push in bottom insert, place Form 1 on its side plastic film facing upwards in center of the box against the machine you must have all elements add cap with flat side down place in upper insert,...