Disassembly And Repair; Tasks - formlabs Form Wash L Manual

8

Disassembly and repair

All steps that involve opening the machine and/or investigating internal components
should be done by skilled persons under the guidance of Formlabs Support or a
WARNING
certified service provider. Any damage resulting from attempting disassembly and/
or repair without prior authorization from Formlabs Support or a certified service
provider is not covered by warranty. When removing the exterior paneling, disconnect
the machine from its power source before maintenance.
8.1

Tasks

Contact Formlabs Support
authorization, including how to disassemble or remove the exterior paneling.
Task
Replacing the display assembly
Replacing the outer lid hinge
Replacing the impeller
Any other maintenance or repair tasks not listed in section 6 Maintenance requires servicing
the machine. Contact
38
or a certified service provider
Formlabs Support or a
to receive repair instructions and
Frequency
Touchscreen has stopped functioning or does not
accept input
Outer lid does not close fully or move
smoothly
Impeller is damaged or does not turn
certified service provider for service options.