Connecting To A Computer With A Single Ieee 1394 Port - Kodak DCS PRO BACK - USER'S GUIDE Manual

Using the Camera Connected to a Computer
Connecting to a Computer with a Single
IEEE 1394 Port
In addition to accessories included with the DCS
Pro Back Plus, you need:
IEEE 1394 hub
!
6-wire IEEE 1394 cable
!
IEEE
1394 cable
DC
Computer
AC adapter
Connect one end of the included 10m IEEE
1
1394 cable to the IEEE 1394 port on the DCS
Pro Back Plus (page
Contents
Back
DCS Pro Back Plus
IEEE
1394 hub
AC
56).
Next
Connect the other end of the IEEE 1394 cable
2
to any of the ports on the IEEE 1394 hub.
Connect the cable from the included AC
3
adapter to either one of the remaining ports on
the IEEE 1394 hub.
Connect another 6-wire IEEE 1394 cable (not
4
included) from another port on the IEEE 1394
hub to the single IEEE 1394 port on the
computer.
Plug the AC adapter into a wall socket.
5
Index 57