Connecting To A Computer And Using Battery Power - Kodak DCS PRO BACK - USER'S GUIDE Manual

Using the Camera Connected to a Computer
Connecting to a Computer and Using
Battery Power
IEEE 1394 cable
Battery
Computer
1 Connect one end of the included 10m IEEE
1394 cable to the IEEE 1394 port on the DCS
Pro Back Plus.
Contents
Back
DCS Pro Back Plus
Battery cable
Next
2 Connect the other end of the IEEE 1394 cable
to an IEEE 1394 port on the computer.
Following the instructions included with your
3
battery pack, connect the battery pack and its
cable.
Insert the cable into the Battery Connection
4
jack on the DCS Pro Back Plus.
Turn on the battery pack's power switch.
5
Index 58