Setting Battery Save Onset; Setting Display Off Time - Kodak DCS PRO BACK - USER'S GUIDE Manual

Configuring Your Camera

Setting Battery Save Onset

When the DCS Pro Back Plus is powered by
battery and you don't touch any controls during
the specified Battery Save Onset time, it enters
Battery Save state. You can change the onset
time (page 63) from 1:00:00 to 23:59:59
(HH:MM:SS).
The default onset time is 60 minutes.
Display the Properties menu
1
Choose Battery Save Onset from the
2
Properties menu.
The Battery Save Onset screen appears.
3 Press the left or right side of the Four-way
switch to sequence through the numeric fields.
Press the top or bottom of the Four-way switch
4
to change the highlighted numeric value.
Press the OK or Cancel button.
5
Contents
Back
(page 50).
Next
Index

Setting Display Off Time

Extended use of the Image LCD can drain your
battery. For this reason, the LCD turns off after
the length of time specified in the Display Off
Time property.
The default Display Off Time is 60 seconds.
1 Display the Properties menu
Choose Display Off Time from the Properties
2
menu.
Press the left or right side of the Four-way
3
switch to sequence through the numeric fields.
Press the top or bottom of the Four-way switch
4
to change the highlighted numeric value.
5 Press the OK or Cancel button.
(page 50).
51